Esab Rebel Emp 205Ic Ac/Dc Multi-Process ( MIG / TIG / MMA) Dual Voltage 110v/240v
THE TOTAL PACKAGE
It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going - right out of the box.
- MXL 201 Gas-cooled Torch with Euro Connection, 3m
- SR-B 26 TIG torch with accessories
- Electrode holder, return cable and clamp 3 m
- Drive rolls for 0.6, 0.8 and 1.0 mm wire
- Guide tubes 0.6-1.2 mm
- 4.5m gas hose with quick connector
Esab made the impossible possible with the first-ever portable, all-process machine, complete with MIG, Flux-Cored, MMA, DC TIG, and now AC TIG capabilities, which means yes it TIG welds aluminium. It is a TRUE all-in-one welding system that delivers best-in-class performance in each process in the most portable, durable, go anywhere, weld anything industrial package on the market today.
ALL THE INDUSTRIAL TIG CONTROLS
YOU NEED.
Fixed or limited settings will not cut it in the industrial world. We built Rebel EMP 205ic AC/DC for welders who want full control over the arc, especially with TIG. That means you get LiftTIG and high frequency (HF) start, AC wave balance (60%90%), AC frequency (25400 Hz), pulsed (DC) (1500 pps), and amplitude offset the next level in AC TIG adjustment.
MIG. FLUX-CORED. STICK. DC TIG. AC TIG.
Best-in-class all-process performance can be all yours with Rebel 205ic AC/DC, the only industrial-grade portable machine of its kind that lets you TIG weld aluminium like a pro and use 6010 electrodes on 120 V input. It runs MIG, Flux-Cored, MMA, DC TIG, and AC TIG like it was born to, without sacrificing performance.
SMART MIG TECHNOLOGY
Whether you have been welding for two years or 20, Rebels exclusive sMIG (smartMIG) technology is sure to impress. For the novice, there is basic mode, which makes setup a breeze. For the professional, the builtin dynamic arc control constantly monitors your weld and adapts to your technique, providing a smooth, stable arc and superior, repeatable welds.
READY FOR ANYTHING.
You never know what welding process your next job will require, or what kind of input power you will have available. That is why we have packed Rebel with the kinds of features that give you the flexibility to go anywhere and weld anything, so whether you have access to 120V or 230V power or even a generator, Rebel's got you covered.
THE TOTAL PACKAGE.
It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going - right out of the box.
- MXL 201 Gas-cooled Torch with Euro Connection, 3m
- SR-B 26 TIG torch with accessories
- Electrode holder, return cable and clamp 3 m
- Drive rolls for 0.6, 0.8 and 1.0 mm wire
- Guide tubes 0.6-1.2 mm
- 4.5m gas hose with quick con
