Bohler Foxcore 316L-T1 1.2mm 15KG Spool

STAINLESS STEEL 316L FLUX CORED WIRE

Rutile flux-cored wire of T 19 12 3 L P / E316LT1 type designed for welding 1.4404, 1.4432 / 316L type stainless steels with good resistance to general, pitting and intergranular corrosion in chloride containing environments. Intended for severe service conditions, e.g. in dilute hot acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4571 / 316Ti for service temperatures not exceeding 400°C. For higher temperatures a niobium-stabilized consumable such as FOXcore 318-T1 is required. The scaling temperature is approximately 850°C in air. Designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –120°C to 400°C. For flat and horizontal welding positions, FOXcore 316L-T0 DG may be preferred. replaces item numbers: 36059 / 61321

data sheet below

​​​​​​​